60 AMP Fan Control

The Fan Switch is designed to operate using a two 30 AMP circuit Breakers, and two 30 AMP Relays
It is designed to operate a two heavy duty fans
There is a separate wire to each fan so if one dies the system will still run the second fan
A double heavy duty fan set up requires up to around 56 AMPS on start up and around 40 AMPS on run
Remember the more current you draw will take HP out of the engine as the alternator tries to keep the battery topped up.

If you only want to run one fan some times put an ON/OFF switch in the green wire to one of the fans