Low High Capacity Profile Sump

This design keeps the sump inside the frame rails and allows you to use 6 litres of oil.

• 
• 
• 
• 
• 
• 

3mm Mesh Pickup, this goes in first at the back of the sump

Baffles should be put in at even spacing and welded into place

Windage Tray can be weled into place, it is recomended that Zoos Tags are used to allow it to be removed for cleaning,

Rear Sump Fittings, this uses a D10 weld in fitting

Fitting Kit includes Speedflow D10 Hose and 90 degree fittings, Oil Gallery Block plug, Plug for external oil Line, inspection and sump plugs

Block Fittings, Tap the existing Oil Pick Up passage 3/8 NPT and block.

Choose an image to begin

 

Check the oil through the inspecition hose at the front of the sump just like checking the quick change diff.

The bump on the centre of the rear main cap will have to be removed to allow clearance of the sump.

Back to Top